The characteristic pattern of multiple colored layers in coastal stratified lakes in the process of separation from the White Sea

An unusual feature of the saline stratified lakes that were formed due to ongoing postglacial uplift on the White Sea coast is the presence of several differently colored thin layers in the zone with sharp gradients. Colored layers in five lakes at various stages of separation from the sea were investigated using optical microscopy, spectrophotometry, spectrofluorimetry, and photobiology. The upper greenish colored layer located in the aerobic strata of all lakes near the compensation depth of 1% light penetration contains green algae. In the chemocline, another layer, brightly green, red or pink, is dominated by mixotrophic flagellates. Despite the very low light intensities and the presence of H 2 S, active photosynthesis by these algae appears to be occurring, as indicated by high values of the maximum quantum yield of primary photochemistry, electron transport activity, photosynthetic activity of photosystem II, the fraction of active centers, and low values of heat dissipation. In the reduced zone of the chemocline, a dense green or brown suspension of anoxygenic phototrophs(green sulfur bacteria) is located.     

Grains of Nonferrous and Noble Metals in Iron–Manganese Formations and Igneous Rocks of Submarine Elevations of the Sea of Japan

Iron–manganese formations and igneous rocks of submarine elevations in the Sea of Japan contain overlapping mineral phases (grains) with quite identical morphology, localization, and chemical composition. Most of the grains conform to oxides, intermetallic compounds, native elements, sulfides, and sulfates in terms of the set of nonferrous, noble, and certain other metals (Cu, Zn, Sn, Pb, Ni, Mo, Ag, Pd, and Pt). The main conclusion that postvolcanic hydrothermal fluids are the key sources of metals is based upon a comparison of the data of electron microprobe analysis of iron–manganese formations and igneous rocks dredged at the same submarine elevations in the Sea of Japan.     

Steady Lateral Growth of Three-Dimensional Particle Laden Density Currents

In this paper the steady lateral growth of three-dimensional turbulent inclined turbidity current is investigated. To simulate the current, an experimental setup is developed to analyze the turbidity current for different regimes in the particle laden density currents environment. The Buckingham's π theorem together with a dimensional analysis is implemented to derive the appropriate non-dimensional variables. The experimental results were normalized and plotted in the form of non-dimensional graphs from which a theoretical model is developed and analyzed. Based on the results obtained for the steady lateral growth, three different regimes, namely, inertia-viscous one as the first regime, buoyancy-viscous and gravity-viscous as the second and third regimes are distinguished within the current.In these regimes, the force balance is between the driving and resisting forces. Namely, in the first regime, the force balance is between the inertia and viscous forces, in the second regime, the buoyancy and viscous forces, and in the third regime, gravity and viscous forces are balanced. The experimental results indicate that the lateral growth rate in the first regime is smaller than that in the second and third regimes due to the magnitude and type of the forces involved in those regimes. According to the graphical results, the three different lateral growth rates appear when the normalized current length is smaller than about 3, between about 3 and 10, and larger than about 10. In those regions,the slopes of the data are different with respect to one another.     

福建省海洋工程装备产业现状与发展对策探讨

近年来,福建海洋工程装备产业进步显著,初步形成了以港口装卸、海上起重机、海底铺管、大型汽车滚装船等传统装备为主导的制造基地;同时,海水淡化核心装备、海洋防腐材料、水下作业机器人、游艇装备等新兴产业也取得了快速发展,但仍存在产业基础薄弱、整体产品低端、研发力量小且分散、试验研发平台严重不足等制约"瓶颈"。文章通过现场调研和资料查询分析了福建海洋工程装备产业的发展现状,总结归纳出当前制约产业发展的主要因素,明确发展思路,提出建设具有海西特色的海工装备制造业应发展海洋工程装备的重点领域、编制福建省海洋工程装备中长期发展规划和实施方案、提升海洋工程装备科技创新能力、制定海洋工程装备发展的扶持政策、构建比较完整的重点领域海洋工程装备产业链等对策与建议。     

利用短期静态PPP结果反演海潮负荷位移

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算，获得4组PPP坐标序列，利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位），将其与海潮模型计算的负荷位移参数进行对比，并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明，垂直和水平方向上，不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异；PPP反演8个分潮垂向负荷位移优于全球海潮模型，但水平方向上的反演效果稍弱。     

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.     

Traces of Seismic Activity in Architectural Monuments in Derbent,Dagestan

Izvestiya, Atmospheric and Oceanic Physics - As a result of studies conducted in the city of Derbent, it is established that its monumental fortification structures erected at the end of the 560s...     

Fe3O4/Mg(OH)2复合材料的制备及形貌控制

通过种子沉积法制备出Fe_3O_4/Mg(OH)_2复合材料并进行XRD、SEM测试分析。探究了氨水的浓度与加入速度、搅拌速度及等因素对磁性复合材料形貌的影响。氨水浓度与注入速度的降低,对氢氧化镁基体形貌的影响是相同的,但要使合成磁性复合材料形貌和四氧化三铁粒子在氢氧化镁中分散性均匀,应控制氨水浓度(ω=2.5%)或加入速度在一个合理的较低值。     

Active capture and anomalous adsorption: New mechanisms for the incorporation of heavy noble gases

Abstract— Active capture is a new process for the incorporation of large quantities of heavy noble gases into growing surfaces. Adsorption in the conventional sense involves surface bonding by polarization (Van der Waals forces). What is referred to as “anomalous adsorption” of heavy noble gases involves chemical bonds and can occur when other (more chemically active) species are not available to preempt sites with unfilled bonds. Anomalous adsorption has been observed under conditions of fracture, vacuum deposition and ionizing radiation. Active capture depends upon anomalous adsorption to retain noble gases on a surface long enough to be captured in a growing surface film as it is deposited. The fundamental principle may be the impingement onto the growing film with sufficient energy to liberate surface electrons (work function energy of a few electronvolts) so that they are retained by anomalous adsorption long enough to be entrapped in the growing surface. Trapping efficiencies of ?1% have been observed for Kr and Xe in laboratory experiments, implying a fundamentally new mechanism for the incorporation of heavy noble gases onto surfaces. It may play a role in explaining the large concentrations of planetary noble gases contained in phase‐Q.